.png)
Simple. Easy. Superior Strength.
Our parallel chord steel trusses create maximum overhead clearance, allowing you more storage space. With clearspans from 8' to 100' for gable trusses and up to 30' for lean-to trusses, your building possibilities are extremely flexible!
Plus, replacing wood trusses with steel trusses will reduce labor & wood materials, putting more money back into your pocket. And the best part? Steel trusses make your building setup SO SIMPLE. Design your build with our Steel Trusses to see your building kit, and we'll send you a free quote!
.png)
Gable Truss, Snoot
Truss, Lean-To Truss,
& Bar Joist Truss Options
.jpeg)
.jpeg)
Gable Truss
General Description:
Gable Trusses are parallel chord “gable” style trusses that are joined at the apex by bolts. They are typically used for primary roof support for buildings. All steel gable trusses are clearspan.
Available Sizes:
-
8’ to 100’
Material:
-
1.5” x 1.5” x ⅛” 50 KSI steel up to 40’
-
2” x 2” x 3/16” greater than 40
Coating:
-
Dip Coated
Standard Pitch:
-
4:12 – Custom pitches are available from 3:12 – 8:12
Hardware:
-
x8 - ⅜”x4” Gr 5 Lag Screws (truss to post)
-
X4 - 7/16” Gr 5 Bolt w/ Nut (truss to truss
Non-Standard Options:
-
Ceiling cups (cups on the underside of the truss that allow for attaching a ceiling)
-
Fascia plates (plates on the end of the truss tail that match the pitch of the truss and allow for a flush fascia board)
-
Knee braces (welded bracing on the post side of the truss that increases stability)
Durable
Unlike wood, steel trusses won't rot, aren't susceptible to termite damage, and have welded joints that create superior strength.
Made in America
We're committed to using American made steel trusses that are manufactured by American workers.
Maximum Space
Our parallel chord steel trusses create for maximum overhead clearance allowing you more storage space.
Cost Effective
Steel trusses require far less material than wood trusses. Less material and less labor means more money in your pocket.
_edited.png)
This customer stick framed their building but still incorporated steel trusses.
Small post frame kit with steel trusses
This customer stick framed their building but still incorporated steel trusses.
Gallery
Specifications
-
1-1/2 x 1-1/2" x 1/8" Steel Chords, Base, and Vertical Ends
-
1-1/4" x 1-1/4" x 1/8" Webbing
-
ASTM 50 KSI Steel
Ratings
-
Roof Live Load -20 PSF
-
Ground Snow Load - 15 PSF
-
Design Wind Speed - 105 mph
-
Wind Risk Category II
-
Wind Exposure Category C
-
Allowable Dead Load - 10 PSF at 10' OC spacing
Resources Coming Soon
.png)
If you already have some components we're happy to quote you just the steel trusses or any other individual components that you need! We can also quote your post frame building complete with everything you need from framing, to trusses to metal sheathing. Just enter the specifications in the note section of the form.
SHOP POST FRAME PLANS
